Color shift camera raw to PSCC
Posted: Fri Feb 23, 2018 11:27 am
I thought I'd post this issue here to see if others have experienced similar issues. I recently purchased a custom Puget PC and paired it with a new NEC PA272W monitor and notice a difference in color/warmth when opening images in PSCC2018. The colors and warmth in camera raw seem to get washed out after opening the image in PSCC2018. There's not a change in color, but images look washed out/dull in comparison.
My monitor is calibrated to 110/2.2/D65 (in fact I re calibrated numerous times in hopes that would solve the issue) using NEC's spectraview software and an i1 Display Pro, so I'm confident it's not a calibration issue. My color settings in camera raw and PS are the same (aRGB). In fact, my settings are the same as my old system (mac pro and NEC monitor) and I never experienced this issue on the old system.
I've been struggling to resolve this for a couple of weeks now by researching Adobe forums, etc., but no luck. The only thing I see as a possible discrepancy with my system that might be causing the issue is what my preferences show under graphics card settings. Photoshop shows the graphics processor as "Intel UHD Graphics 630", while camera raw preferences shows performnce settings "NVIDIA Quadro P2000".
Any help on this would be much appreciated as my limited technical knowledge is exhausted.
Thank you.
Mark
My monitor is calibrated to 110/2.2/D65 (in fact I re calibrated numerous times in hopes that would solve the issue) using NEC's spectraview software and an i1 Display Pro, so I'm confident it's not a calibration issue. My color settings in camera raw and PS are the same (aRGB). In fact, my settings are the same as my old system (mac pro and NEC monitor) and I never experienced this issue on the old system.
I've been struggling to resolve this for a couple of weeks now by researching Adobe forums, etc., but no luck. The only thing I see as a possible discrepancy with my system that might be causing the issue is what my preferences show under graphics card settings. Photoshop shows the graphics processor as "Intel UHD Graphics 630", while camera raw preferences shows performnce settings "NVIDIA Quadro P2000".
Any help on this would be much appreciated as my limited technical knowledge is exhausted.
Thank you.
Mark