Page 1 of 1

Bin file and firmware

Posted: Thu Jun 29, 2017 10:02 pm
by jimbo
Having trouble with nikon formware for nikon D 810.  Every thing goes ok till i open NikonUpdate Only thing in there is a pdf file. I believe I am following instructions on nikon site and those solution previous discussed on this site.  Have updated many times
And did not have this much problem.  Thanks jimbo.    Running windows 7                                                                                 
  

Posted: Fri Jun 30, 2017 8:27 am
by aolander
I just downloaded the firmware update, double clicked on the .exe file which produced a folder with the .bin file in it. There is a link on the Download Center page under "Updating the Camera Firmware" that is a pdf for detailed instructions. Is that what you mean? The firmware download button is below the "End User Agreement".

http://downloadcenter.nikonimglib.com/e ... w/218.html

Re: Bin file and firmware

Posted: Fri Jun 30, 2017 8:41 am
by E.J. Peiker
As Alan stated, you first extract the BIN file.  
The download is an EXE file - when you run that EXE file it creates a new folder in your Downoads folder.  Inside that folder is the BIN file.  That file is copied to a card's root directory and then inserted into the camera.

From Nikon's instructions:
-Create a folder on the computer hard disk and name it as desired.
-Download F-D810-V112W.exe to the folder created in Step 1.
-Run F-D810-V112W.exe to extract the following file to a folder named “D810Update”:
• D810_0112.bin (the camera firmware)
-Using a card slot or card reader, copy “D810_0112.bin” to a memory card that has been formatted in the camera.
-Insert the memory card into the camera slot currently selected as the primary slot and turn the camera on.
-Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
-Once the update is complete, turn the camera off and remove the memory card.
-Confirm that the firmware has been updated to the new version.

In most cases you can ignore the first two steps as Windows defaults to the Downloads folder unless you have specifically decided to DL to a different folder.

Posted: Fri Jun 30, 2017 3:11 pm
by jimbo
I have followed nikon instructions. I run the .exe file i get the d810update when i open the d810update i get D810-0112 in adobe acrobat form. That cannot be open. Not getting the bin file

Posted: Fri Jun 30, 2017 5:04 pm
by E.J. Peiker
Try the DL again from here:
http://downloadcenter.nikonimglib.com/e ... w/218.html

I just did this, ran the exe file and got a D810Update folder that had the D810_0112.bin file in it as its only file.

Re:

Posted: Sun Jul 02, 2017 10:28 am
by jimbo
E.J. Peiker wrote:Try the DL again from here:
http://downloadcenter.nikonimglib.com/e ... w/218.html

I just did this, ran the exe file and got a D810Update folder that had the D810_0112.bin file in it as its only file.
tried as you suggested still got the same results, finally dawn on me to try laptop running windows 10. everything went fine.  something
has went cockeyed on the desktop running windows 7. thanks to all !

Posted: Sun Jul 02, 2017 12:53 pm
by E.J. Peiker
I did it on Win 7. It's likely you have non viewable files hidden so youa re only getting files that have file type associations for viewing. Go into your file preferences and turn on all files:
In Windows Explorer - Tools > Folder Options > View and then check Show Hidden Files and Folders

Posted: Sun Jul 02, 2017 6:09 pm
by jimbo
found solution, had adobe acrobat reader dc installed. when I removed that program, then everything downloaded from Nikon worked perfectly, thank you !
Jimbo