CAMERA PLATES A camera plate is needed to mount your camera to a tripod. NatureScapes.Net offers the Wimberley P-5 universal camera body plate. Note that with a gimbal head adapter, a camera can be attached to a gimbal head directly via the camera plate.
	LENS PLATES Lens plates attach to the lens foot of your lens and allow it to be mounted to a tripod head or ballhead. Safety stops at the front and back of our plates help to keep your lens from accidentally slipping out of the quick-release clamp. Some of the smaller plates have anti-twist nubs at the back of the plate, which help to keep the plate from twisting if it is mounted with only one fastener.
	LENS FEET / ADAPTER PLATES Also known as “replacement feet,” adapter plates replace the existing lens foot and lower the center of gravity of large lenses, also making them easier to pack. In some cases there is also a savings in weight over the stock foot, valuable to photographers traveling by air to destinations with strict weight restrictions.

WIMBERLEY QUICK RELEASE LENS PLATES

Wimberley offers a line of Arca-Swiss style quick release plates for collared lenses, with safety stops at the front and back of the plate in order to prevent your lens from accidentally slipping out of the quick release clamp. When using both stops you must open the jaws of the quick release wide enough to load your lens from the top instead of sliding it in. Stops can be added or removed with the hex key provided.

Wimberley plates are long enough to provide adequate distance between the two stop screws to straddle the length of most quick release clamps. The stop screws do limit allowable forward-backward adjustment. Use in combination with Wimberley quick release clamps solves this problem, as clamps have channels extending to almost the center of the clamp. The channels allow full range of forward and back motion but will not let the plate slip out.

The double dovetail cross-section on the plates allows you to attach Wimberley flash brackets to the upper or lower surface of the plate (double dovetail cross-section shown at right). Lens plates come in five sizes that accommodate nearly every collared lens on the market. The plates have slots that allow multiple fasteners and a wide variety of fastener positions so the plate can be oriented on the lens foot in a way that best fits your needs. Hang the plate off the front or back of the lens foot to attach flash brackets to the plate. Adjust the position to best suit the balance point of your lens.

Wimberley plates are ideal for components of Wimberley's flash bracket system but are also milled to accept Really Right Stuff and Kirk flash brackets. The specially milled end of the plate works equally well hanging off the font or back of the lens foot. To use Kirk brackets you must install two special screws that are included with the plate; the ends of these screws serve as nubs that keep the bracket from twisting.

Anti-twist nubs are available on the shorter plates which can be placed flush with the lens foot to prevent the plate from swiveling. The larger plates do not have the anti-twist flanges, as they are secured with multiple fasteners.

SUGGESTED WIMBERLEY LENS PLATES FOR COMMON LENSES

The suggested plates allow enough length to easily balance your lens in almost every configuration. The plates are generally at least 3/4" longer than the mounting foot of the suggested lens. This allows you to attach a flash bracket to the top surface of the plate. But these are only suggestions. If you wish to buy a plate other than the one suggested, or if your lens is not listed below, please use the plate pictures and dimensions listed to guide your selection.

(ef) You may wish to purchase separate, extra fasteners with the plate in the quantity indicated.
(rb) You may wish to purchase separate, extra reducer bushings with the plate in the quantity indicated.
* Note: The recommendations for Sigma lenses assume the standard factory foot is installed on the lens. In some cases, Sigma sometimes installs their larger TS-41 Replacement Collar and Foot instead. Measure the length of the foot on your lens to ensure the suggested plate is correct; the plate should be about one inch longer than the foot on your lens.

Mounting Systems

Sort by:     SKU     Product     Price      Default     See details AK-100 Wimberley Sidekick Safety Plate The AK-100 attaches to the Wimberley Sidekick, providing a dovetail width that conforms to the limited clamping range of RRS lever-style clamps. Traditional twist-knob clamps will work with the AK-100 as well. Our price: $42.95 Quantity   1 2  Buy Now  See details Gimbal Head Adapter This gimbal head adapter mounts to your Wimberley Head WH-101 or WH-200 clamp and attaches to your camera plate, allowing you to shoot with your camera mounted to the Wimberley Head instead of the lens. The perfect solution for hiking photographers focusing on wildlife photography who might take ... Our price: $124.95 Quantity   1 2 3  Buy Now  See details P-5 Arca-Swiss Style Universal Camera Body Plate, 3" Long The Wimberley P-5 universal camera plate works with camera bodies, point-and-shoot cameras, medium format cameras, and even collared lenses. It features the same unique dual safety stops found on Wimberley lens plates. Our price: $51.95 Quantity   1 2 3 4 5 6  Buy Now  See details P-10 Arca-Swiss Style Lens Plate, 3.31" Long The double-dovetail Wimberley P-10 lens plate is 3.31" long and comes with dual safety stops, one lens attachment screw and anti-twist nubs. See the chart for lens compatibility. Our price: $51.95 Quantity   1 2 3 4  Buy Now  See details P-20 Arca-Swiss Style Lens Plate, 3.86" Long The double-dovetail Wimberley P-20 lens plate is 3.86" long and comes with dual safety stops, one lens attachment screw and anti-twist nubs. See the chart for lens compatibility. Our price: $51.95 Quantity   Out of stock See details P-30 Arca-Swiss Style Lens Plate, 4.43" Long The double-dovetail Wimberley P-30 lens plate is 4.43" long and comes with dual safety stops, two lens attachment screws and anti-twist nubs. See the chart for lens compatibility. Our price: $54.95 Quantity   1 2 3 4  Buy Now  See details P-40 Arca-Swiss Style Lens Plate, 5.88" Long The double-dovetail Wimberley P-40 lens plate is 5.88" long and comes with dual safety stops and three lens attachment screws. See the chart for lens compatibility. Our price: $57.95 Quantity   1  Buy Now  See details P-50 Arca-Swiss Style Lens Plate, 6.58" Long The double-dovetail Wimberley P-50 lens plate is 6.58" long and comes with dual safety stops and three lens attachment screws. See the chart for lens compatibility. Our price: $57.95 Quantity   Out of stock See details AP-602 Adapter Plate for Canon Lenses The tall mounting feet on Canon long lenses can be removed and replaced with a Wimberley double dovetail adapter plate. The plate reduces overall weight and bulk and lowers the center of gravity of the lens. Our price: $78.95 Quantity   1  Buy Now  See details CP-40 Custom Replacement Foot for Canon 400 f2.8 IS Lens The tall mounting foot on the Canon 400 f2.8 IS lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens, and features a double dovetail design for mounting accessories. Our price: $69.95 Quantity   1 2  Buy Now  See details CP-42 Custom Lens Adapter Plate for Canon 400/4 IS DO and 300 2.8 IS Lenses The tall mounting foot on the Canon 400 f4 DO IS and the 300 2.8 IS lenes can be removed and replaced with a 4th Generation Designs adapter plate. The plate reduces overall weight and bulk and lowers the center of gravity of the lens. It features a double dovetail design for mounting accesories,... Our price: $84.95 Quantity   1 2  Buy Now  See details CP-51 Custom Replacement Foot for Canon 500 f4 IS Lens The tall mounting foot on the Canon 500 f4 IS lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens and features a double dovetail design for mounting accessories. Our price: $84.95 Quantity   1 2 3 4  Buy Now  See details CP-61 Custom Replacement Foot for Canon 600 f4 IS Lens The tall mounting foot on the Canon 600 f4 IS lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens, and features a double dovetail design for mounting accessories. Our price: $84.95 Quantity   1 2 3  Buy Now  See details CR-80 Custom Replacement Foot for Canon 800 f5.6 IS Lens The tall mounting foot on the Canon 800 f5.6 IS lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens, and features a double dovetail design for mounting accessories. Our price: $89.95 Quantity   Out of stock See details AP-452 Adapter Plate for Nikon Lenses The tall mounting feet on Nikon lenses can be removed and replaced with a Wimberley double dovetail adapter plate. The plate reduces overall weight and bulk and lowers the center of gravity of the lens. Our price: $78.95 Quantity   1  Buy Now  See details AP-553 Adapter Plate for Nikon Lenses The tall mounting feet on Nikon lenses can be removed and replaced with a Wimberley double dovetail adapter plate. The plate reduces overall weight and bulk and lowers the center of gravity of the lens. Our price: $78.95 Quantity   Out of stock See details AP-652 Adapter Plate for Nikon 600 f/4 AF-S I The tall mounting foot on the Nikon 600/4 AF-S I lens can be removed and replaced with a Wimberley double dovetail adapter plate. The plate reduces overall weight and bulk and lowers the center of gravity of the lens. Our price: $78.95 Quantity   1 2 3  Buy Now  See details NP-42 Custom Replacement Foot for Nikon 200-400 VR The tall mounting foot on the Nikon 200-400 VR lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens and features a double dovetail design for mounting accessories. Our price: $84.95 Quantity   Out of stock See details NP-61 Custom Replacement Foot for Nikon 600 VR The tall mounting foot on the Nikon 600 VR lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens and features a double dovetail design for mounting accessories. Our price: $84.95 Quantity   1  Buy Now  See details NR-52 Custom Replacement Foot for Nikon 500 VR The tall mounting foot on the Nikon 500 VR lens can be removed and replaced with a 4th Generation Designs custom lens foot. The foot reduces overall weight, lowers the center of gravity of the lens and features a double dovetail design for mounting accessories. Our price: $84.95 Quantity   1 2 3  Buy Now  See details Wimberley C-10 Quick Release Clamp The Wimberley C-10 clamp is 2.5" long with a central 3/8" threaded hole for fastening it to equipment such as a tripod head. Our price: $78.95 Quantity   1 2 3 4 5  Buy Now  See details Wimberley C-30 Quick Release Clamp The Wimberley C-30 clamp is 4.1" long and works with the Wimberley Head as well as other equipment. Our price: $99.95 Quantity   Out of stock See details Brass Reducer Bushing Brass bushings to reduce a 3/8" lens mounting hole to 1/4" hole, allowing use with the Wimberley plates with accompanying screws. Our price: $3.00 Quantity   1 2 3 4 5 6 7 8 9 10  Buy Now  See details Extra Fastener Extra fastener for Wimberley Arca-Swiss style plates. Our price: $1.00 Quantity   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25  Buy Now